Skip to content
Dark gray horizontal-slat sliding gate standing open beside the stamped-concrete driveway of a limestone and brick ranch house under live oaks

Gates Fixed& InstalledIn San Antonio

Gate repair, new swing and slide gates, openers and keypads for driveways and property entrances across San Antonio, Olmos Park and Alamo Heights.

Gate Acting Up?

* Required

What we work on

Repair, Install, Automate

A gate that drags, stalls or will not latch usually needs a worn part put right, not a whole new gate. When a gate is past saving, or there is no gate yet, the job is a new one built to suit the drive.

Something wrong with your gate? Start with the signs and symptoms. First time hiring a gate company? Our process walks through a typical job, and the glossary turns trade terms into plain words.

The company

The Shop Behind the Gates

Gates, openers and keypads across San Antonio since 2016, for homes, small businesses and neighborhood associations.

Owner Arthur Sanders traces trouble to its source: a stalled slide gate is often a worn roller or a bent track, not a bad motor.

About Us
Dark gray crew cab pickup with a ladder rack and a yellow and white sweep along its side, the Olmos Park Gate Services logo on the front door and the phone number on the bed
Long black aluminum vertical-board slide gate on wheels along a concrete strip, its tall end post at the right
Wood-look slide gate in a black steel frame across an alley driveway, a cedar-sided garage behind it

First Call Questions

Which service fits my situation?

If the gate is up and misbehaving (it drags, sags, sticks or will not latch), start with repair. If it moves freely by hand but the motor stalls, hums or reverses, the opener is the likely culprit. Keypads, remotes, intercoms and card readers fall under access control. No gate yet, or a frame that is past saving, means installation. A gate that still works but squeaks, slows or needs a shove is due for maintenance.

Should I repair the gate or replace it?

Repair makes sense when the frame is sound and the trouble is a part: a hinge, a roller, a bent track, a latch or a safety sensor. Replacement is worth a look when the frame is rusted through or rotted, the same repair keeps coming back, or the gate no longer suits the driveway or cannot carry an opener.

What should I have ready before I call?

Know whether the gate swings or slides, roughly how old it is, and what it does and when: every time, only when hot, only in the morning. If the opener or keypad has a brand name on it, jot it down. A couple of photos of the hinges, the track or the motor box help too.

Is it safe to keep using a gate that will not close properly?

A gate that hangs off a post, drops into the drive or reverses without reason should be left alone until it is checked. Put it in manual mode with the release if it has an opener, and keep people and cars clear of its path.

Do you work on business and neighborhood entrances?

Yes. Small businesses and neighborhood associations call when an entrance gate has to open and close reliably all day, and the work covers their operators, keypads, intercoms and card readers as well as the gates themselves.

Call (726) 213-6879